Polaris 2008 sportsman 800efi User Manual

7.9
FINAL DRIVE
7
4. Install snap ring to contain bearing cap just installed.
Repeat procedure for other side.
5. Install snap ring to contain bearing cap just installed.
Repeat procedure for other side.
6. Seat all bearing caps against snap rings by supporting cross
shaft and tapping on each corner as shown.
7. When installation is complete, yokes must pivot freely in
all directions without binding. If the joint is stiff or binding,
tap the yoke lightly to center the joint until it pivots freely
in all directions.

Polaris 2008 sportsman 800efi Specifications

General

Brand	Polaris
Model	2008 sportsman 800efi
Category	Offroad Vehicle
Language	English