2.10
MAINTENANCE
Polaris Lubricant Symbol Identification
NOTE: The symbols used are for quick reference in identifying
which lubricant/grease to use on each component.
Pre-Ride / Daily Inspection
Perform the following pre-ride inspection daily, and when
servicing the vehicle at each scheduled maintenance.
• Tires - check tire condition and air pressures
• Fuel and oil - fill both to their proper level; Do not
overfill
• All brakes - check operation and adjustment (includes
auxiliary brake)
• Throttle -check for free operation
• Headlight/Taillight/Brakelight - check operation of all
indicator lights and switches
• Engine stop switch - check for proper function
• Wheels - check for loose wheel nuts and axle nuts;
check to be sure axle nuts are secured by cotter pins
• Air cleaner element - check for dirt or water; clean or
replace
• Steering - check for free operation, noting any unusual
looseness in any area
• Loose parts - visually inspect vehicle for any damaged
or loose nuts, bolts or fasteners
• Engine coolant - check for proper level at the recovery
bottle
• ADC Fluid Level - check for proper level
Polaris DOT 4
Brake Fluid
Polaris Synthetic AGL
Gearcase Lube
Polaris Synthetic
Polaris 60/40
Demand Drive LT
Premium Hub Fluid
Polaris U-Joint Lube
Polaris All
Season Grease
Polaris ATV Angle
Drive Fluid
2W/50
Coolant
Polaris ADC
Hydraulic Fluid
To Next Page
Loading...
