Polaris 2008 sportsman 800efi - Page 243

7.37
FINAL DRIVE
7
4. Re-install CV shafts, hubs, carrier bolts, etc. and torque to
specifications.
5. Re-install gearcase vent line.
6. Refill the rear gearcase with Polaris Premium Gearcase
Lubricant (PN 2871653). Refer to the “REAR
GEARCASE LUBRICATION” procedure in Chapter 2.
= T
Lower Control Arm Bolt Torque:
37 ft. lbs. (50 Nm)
= T
Upper Control Arm Bolt Torque:
37 ft. lbs. (50 Nm)
= T
Rear Hub Nut Torque:
80 ft. lbs. (109 Nm)
= T
Wheel Nut Torque:
see “Torque Table” on page 7.2