3. Press ## or hang up to exit IVR.
TIP: By pressing the appropriate button sequence on the telephone key pad, you can move to
the next menu of the IVR or invoke a command without first waiting for the previous
announcement to end.
IVR Local Configuration Options
The Main Menu after invoking the IVR is a list of operations that you can select by pressing the
corresponding 1-digit option number.
Table 3-1 IVR Main Menu Configuration Options
Selection Announcement What Can You Do?
1 Basic Network Status
Reads the IP address and DHCP status.
Press 0 to repeat the information.
2 Advanced Network Status
Reads the primary and back-up DNS server,
primary and back-up NTP server.
Press 0 to repeat the information.
3 DHCP Current Value
Reads the current value and you have the option to
change the value.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
4
IP Address Current Value
Reads the current value and you have the option to
change the value. If you elect to enter a new value
(static IP address), DHCP is disabled.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
5
Password Current Value
Reads the current IVR password value and you
have the option to change the value.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
6
Please Wait
One of the following messages plays:
● Software Update Available. Press 1 to update
software
● Software Update Not Available.
If an update is available, press 1 to proceed with the
update. The software update process starts as soon
as you hang up the phone.
Warning: Once the software upgrade process starts,
the device's power LED blinks rapidly. Make sure
the power and network cable stay connected to the
unit until the process is complete.
8 Restore Factory Default Press 1 to confirm device restore to factory default
settings.
Press # to return to device configuration menu.
Press # # to exit IVR.
9
Reboot Press 1 to confirm device reboot.
Press # to return to device configuration menu.
Press # # or hang up to exit IVR.
0
Additional Options
Access other configuration options of your phone.
Enter option followed by the # key.
IVR Local Configuration Options 11
To Next Page
Loading...
