Poly ATA 400 Series User Manual

Table 3-6 SP2 Configuration Options (continued)
Selection Announcement What Can You Do?
268 SP2 Block Anonymous Call Enable Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
272
SP2 Call Forward ALL - Enable / Disable Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
273
SP2 Call Forward ALL Number Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
274
SP2 Call Forward on Busy - Enable / Disable Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
275
SP2 Call Forward on Busy Number Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
276
SP2 Call Forward on No Answer - Enable / Disable Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
277
SP2 Call Forward on No Answer Number Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
PDMS-SP Configuration Options
PDMS-SP service configuration options are available with the device IVR after pressing * * * 0.
PDMS-SP Configuration Options
17

Poly ATA 400 Series Specifications

General

Brand	Poly
Model	ATA 400 Series
Category	Adapter
Language	English