Enable Call Forward on No Answer
When you use Call Forward on No Answer, all calls are forwarded to the number you indicate only
when you don't answer the call with your phone attached to the Poly ATA device.
1. To enable Call Forward on No Answer, from a phone attached to the Phone port on your Poly
ATA device, dial *62.
You hear a prompt to enter the destination number.
2. Enter the number followed by the # key.
You hear a confirmation tone.
3. To disable Call Forward on No Answer, dial *63.
You hear a confirmation tone.
Caller ID - Name and Number
Caller ID allows you to see the number and, if available, the name of the person calling you.
You can use this information to decide whether or not to answer the call. You must have a phone or
other device that supports caller ID to use this feature.
Call Waiting
Call waiting lets you take a second call that comes in when you are already on the phone with another
party without having to disconnect to take the new call.
Since Call Waiting can interfere with fax calls already in progress, you should configure your fax
machine to dial the Cancel Call Waiting code before it dials the destination fax machine.
You're on a call with the first party on a phone connected to the Poly ATA device. You hear a tone
indicating there is a second call coming in.
1. To answer the second call, do one of the following:
● Press the Flash button on the phone handset.
● Depress and release the switch hook on the phone.
The first party is placed on hold and you are connected to the second party.
2. To revert to the first call, repeat the step.
3-Way Calling
3-Way Calling allows you to talk to two parties at the same time with everyone on a telephone at a
different location.
To use 3-Way Calling, when you are in a call with another party and want to add a second to the
conversation, press the “flash” button or depress and release the switch hook on your phone. You are
presented with a second dial tone and the first party is placed on hold. Dial the second party. When
they answer, you can inform them that you intend to connect them with the first party (now on hold)
and have a conference. At this point press the “flash” button or depress and release the switch hook
on your phone. This will connect the first party, the second party and yourself. You can all continue to
talk together.
Enable Call Forward on No Answer
41
To Next Page
Loading...
Need help?
General
