View OBiTALK Service Status
View the current status of your OBiTALK service.
The status of the OBiTALK Service includes the following values:
● Status - Possible values are:
– Normal (User Mode): The service is functioning normally.
– Backing Off: The service is currently down, and the device is taking a short pause before
retrying the connection.
● CallState - Possible values are:
–
N
Active Calls, where
N
= 0, 1,.., as many as the maximum number of calls allowed in the
configuration.
Call Status
The Call Status page shows a number of running call statistics and state parameters for each active
call currently in progress.
For each entry on the call status page, the following buttons may be available:
● Remove: This button is available for all calls. Pressing this button ends that call.
● Record: This button is available for calls involving the Phone port only. Pressing this button allows
you to record the current conversation in an audio (.au) file.
Call History
The Call History page shows the last 400 calls made with the device.
Detailed call information is available, including what terminals were involved, the name (if available) of
the Peer endpoints making the call and the direction / path the call took.
The Call History page also captures what time various events took place.
The Call History can be saved at any time by clicking on the “Save All” button. The Call History can be
saved as an XML formatted file called callhistory.xml.
SP Services Stats
See the
SP Services Stats
page for the statistics relevant to SP
n
, where
n
= 1, 2, 3, 4).
For information on the parameters displayed on this page, see the Parameter Reference Guide.
Phone Port Status
See the
PHONE Port Status
page for the statistics relevant to the Phone
n
ports.
For information on the parameters displayed on this page, see the Parameter Reference Guide.
View OBiTALK Service Status
53
To Next Page
Loading...
Need help?
General
