Poly ATA 400 Series - OBiWiFi-Related Configuration Options

Table 3-3 Network Related Configuration Options
Selection Announcement What Can You Do?
20 DHCP Configuration
Reads the current value of the DHCP configuration.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
21
IP Address
Reads the current value of the IP address.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
22
Default Gateway
Reads the current value of the default Internet gateway.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
23
Subnet Mask
Reads the current value of the subnet mask.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
24
DNS Server (Primary)
Reads the current value of the primary DNS server.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
26
NTP Server (Primary)
Reads the current value of the primary NTP server.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
OBiWiFi-Related Configuration Options
Additional OBiWiFi-related configuration options are available with the device IVR after pressing * * *
0.
OBiWiFi-Related Configuration Options
13