3. Select Backup.
All passwords and PINs are excluded from the backup file. Hence they are not available to
restore. Call history is excluded from the backup, but can be saved as an XML formatted file
separately from the
Call History
web page.
4. Select Save.
You can change the file name and the location to save the backup file from the default options.
Resetting Configuration to Factory Default
You can reset the device configuration you to the factory default condition.
Call history and various statistical information are removed at the same time. Resetting the device
configuration should be used with extreme caution as the operation can’t be undone.
1. In the system web interface, go to System Management > Device Update.
2. Under Reset Configuration, select Reset. A confirmation window pops up. The device then
proceeds to reset the configuration once you confirm the action.
Your device restarts automatically when factory reset completes.
Resetting Configuration to Factory Default
You can reset the device configuration to the factory default condition.
1. In the system web interface, go to System Management > Device Update.
2. Under Reset Configuration, select Restore.
Your system restarts.
Zero-Touch, Massive Scale Remote Provisioning
Poly ZT or Zero Touch provisioning is a system level approach to deploying and maintaining
thousands or millions of Poly devices with high security and control at the device level down to
the individual parameter provisioned on each device.
Please contact ata.support@Poly.com for information regarding the capability, process and practice
of using Poly ZT Provisioning.
Resetting Configuration to Factory Default
23
To Next Page
Loading...
Need help?
General
