● Depending on the type of phone, do one of the following:
– Lift the handset from the cradle, enter the number, and press the Dial button or softkey.
– Enter a number using the dialpad, press the speakerphone button.
– Enter a number using the dialpad, press the headset button.
Call Forwarding
Call Forwarding allows you to send incoming calls to another number of your choosing.
You can forward calls to a number reachable from the VoIP service or the PDMS-SP network. You
can enable the following types of call forwarding on the device:
● Call Forward All
● Call Forward on Busy
● Call Forward on No Answer
Enable Call Forward All
When you use Call Forward All, all calls are immediately forwarded to the number you indicate when
you turn on the feature.
1. To enable Call Forward All, from a phone attached to the Phone port of your Poly ATA device,
dial *72.
You hear a prompt to enter the destination number.
2. Enter the number followed by the # key.
You hear a confirmation tone.
3. To disable Call Forward All, dial *73.
You hear a confirmation tone.
Enable Call Forward on Busy
When you use Call Forward on Busy, all calls are forwarded to the number you indicate only when
you’re already engaged in a call with your phone attached to the Poly ATA device.
1. To enable Call Forward on Busy, from a phone attached to the Phone port on your Poly ATA
device, dial *60.
You hear a prompt to enter the destination number.
2. Enter the number followed by the # key.
You hear a confirmation tone.
3. To disable Call Forward on Busy, dial *61.
You hear a confirmation tone.
40
Chapter 6Device Interface
To Next Page
Loading...
Need help?
General
