Automatic Call Back (Call Return)
Automatic Call Back, also called Call Return can be used to call back the last caller who called you
without actually dialing their number.
To use Automatic Call Back, from the phone attached to the device, dial *69. The device will then
attempt to use the previous callers Caller ID information to make the call.
Repeat Dialing
Repeat Dialing is useful when you call a number that is busy and you want to keep trying so that your
call gets through when the far end is available.
Repeat dialing will continue to try the last number until the device can complete the call or Repeat
dialing is canceled. To enable repeat dialing, from the phone attached to the device, dial *05 and
hang up. To cancel repeat dialing, from the phone attached to the device, dial *06.
Anonymous Call Block
Anonymous Call Block allows you to block calls from incoming callers when there is no identifying
caller ID name or number.
Incoming calls are presented with a busy signal. To use Anonymous Call Block, dial *77 on the phone
attached to your device. To cancel Anonymous Call Block, dial *87 on the phone attached to your
device.
Do Not Disturb
Do Not Disturb (DND) allows you to set the phone to immediately forward calls made to your device to
the number set up as your voicemail number / account.
If no voicemail account is set up, your device returns a busy signal to the caller until you turn off DND.
To turn on DND, dial *78 on the phone attached to your device. To turn off DND, dial *79 on the
phone attached to your device.
Message Waiting Indication - Visual and Tone Based
Message Waiting Indication allows you to be notified when there is a new voice message for you.
The device supports both Visual and Tone based Message Waiting Indication. With Tone-based
Message Waiting Indication, you will know there is a message for you when you hear a “stutter” dial
tone right when you first pick up the phone to make a call. Typically, this stutter tone is removed once
you listen to your message(s). Visual-based Message Waiting Indication turns on a light or screen
icon on your phone (or phone base station) when there is a message waiting for you. Typically, this
light or icon goes dark when you have listened to your new message(s).
Speed Dialing of 99 OBi Endpoints or Numbers
The device supports Speed Dialing of 99 numbers.
These numbers can be associated with phones reachable via an Internet or the PDMS-SP network.
Be careful with the Speed Dial Setup, as this will conflict with the Speed Dials set up on the PDMS-SP
portal. The Speed Dials that are set up on the PDMS-SP portal always overwrite anything set up via
the device.
Automatic Call Back (Call Return)
43
To Next Page
Loading...
Need help?
General
