Poly ATA 400 Series - Page 24

Table 3-7 PDMS-SP Service Options
Selection Announcement What Can You Do?
900 Enable PDMS-SP Service
Reads the current value.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
901
Registration State of PDMS-SP
Reads the current value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
967
PDMS-SP Block Caller ID Enable Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
968
PDMS-SP Block Anonymous Call Enable Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
972
PDMS-SP Call Forward ALL - Enable / Disable Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
973
PDMS-SP Call Forward ALL Number Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
974
PDMS-SP Call Forward on Busy - Enable / Disable Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
975
PDMS-SP Call Forward on Busy Number Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration selection.
18 Chapter 3Configuration and Management Interfaces