Poly ATA 400 Series - Page 32

device.dns.altSrvAddress
Sets the secondary server where the phone directs DNS queries.
Server Address
Change causes system to restart or reboot.
device.dns.serverAddress
Sets the primary server where the phone directs DNS queries.
Server Address
Change causes system to restart or reboot.
device.prov.serverName
IP address
Domain name string
URL
If you modify this parameter, the phone provisions again. The phone also reboots if the
configuration on the provisioning server changes.
device.sntp.serverName
Enter the SNTP server where the phone obtains the current time.
IP address
Domain name string
reg.x.address
The user part (for example, 1002) or the user and the host part (for example, 1002@poly.com)
of the registration SIP URI.
Null (default)
String address
reg.x.displayName
The display name used in SIP signaling and the label that displays on the phone key line.
Null (default)
UTF-8 encoded string
reg.x.label
The text label that displays next to the line key for registration x .
Null (default)
UTF-8 encoded string
reg.x.outboundProxy.address
The IP address or hostname of the SIP server where the phone sends all requests.
Null (default)
IP address or hostname
reg.x.outboundProxy.port
The port of the SIP server where the phone sends all requests.
0 (default)
1 to 65535
reg.x.outboundProxy.transport
The transport method the phone uses to communicate with the SIP server.
DNSnaptr (default)
DNSnaptr, TCPpreferred, UDPOnly, TLS, TCPOnly
If this parameter is set, it takes precedence even if the DHCP server is available.
IP address or hostname - SIP server that accepts registrations.
26
Chapter 4UC Software Configuration on Poly ATA 400 Series