Poly ATA 400 Series User Manual

● [^…] - matches any single alphanumeric character that is not in the set
● Allow alphanumeric and wildcard characters inside a set [ ], such as [x], [X#], [@#], [a-zA-
Zx]
● (map) - An embedded digit map for matching subsequent digits.
● (Mlabel) - A named embedded digit map for matching subsequent digits, where label is one of
abbreviated terminal names. Possible choices are:
– (Msp1) for SP1 Service ::DigitMap
– (Msp2) for SP2 Service ::DigitMap
– (Msp3) for SP3 Service ::DigitMap
– (Msp4) for SP4 Service ::DigitMap
– (Mpp) for PDMS-SP Service ::DigitMap
– (Mph) for PHONE Port ::DigitMap
– (Mph2) for PHONE2 Port ::DigitMap
– (Maa) for Auto Attendant ::DigitMap
– (MtgN) for TrunkGroupN ::DigitMap, N =1,2,3,4
– (MvgN) for VoiceGatewayN ::DigitMap, N =1,2,3,4,5,6,7,8
Recursive Digit Maps
The [^…] and [ ] elements imply that the device digit maps are recursive. Recursive digit maps
allow digit maps to be re-used and make their specification more compact and readable. It is
important that you do not specify digit maps that lead to infinite recursion. For example, a digit map
must not include a named embedded digit map that references itself.
Barring Digit Maps
To bar users from calling numbers that match a rule, add a ‘!' in front of that rule in the digit map.
The rule is then referred to as a barring rule. For example, you might want to bar users from calling
premium or international numbers.
Digit Map Examples
See the following examples of common digit map rules.
1408xxxxxxx - Matches any 11-digit number that starts with 1408.
011xx. - Matches any number that starts with 011 followed by one or more digits.
<1408>xxxxxxx - Matches any 7-digit number. The device prepends 1408 to the number when
calling.
<:1408>xxxxxxx - Equivalent to the last example.
<+>1xxxxxxxxxx - Prepends ‘+' to any 11-digit number that starts with 1.
64
Chapter 11Call Routing

Poly ATA 400 Series Specifications

General

Brand	Poly
Model	ATA 400 Series
Category	Adapter
Language	English