Connecting Bluetooth and USB Devices
Connect certain devices to your Poly CCX business media phone using Bluetooth
or USB.
Connecting Bluetooth Devices
You can connect your Bluetooth–capable phone to a Bluetooth–capable headset
or smartphone.
NOTE: CCX 500, CCX 505, CCX 600, and CCX 700 phones support Bluetooth
connectivity.
Enable Bluetooth
Enable Bluetooth on your phone through the local interface. However, if your
administrator disables Bluetooth, this option isn’t available.
1. Do one of the following:
● Go to Settings > Basic > Bluetooth.
● Go to Menu > Bluetooth.
2. Select Bluetooth Radio (Off), then select On.
Bluetooth turns on, and the Bluetooth icon displays in the phone status bar.
Using Bluetooth Devices on Your Phone
Pair and connect compatible Bluetooth devices such as a mobile phone, tablet,
laptop, or headsets with your phone.
If your administrator enables Bluetooth on your phone, you can pair Bluetooth
devices in host or device mode. Connect a maximum of two Bluetooth devices at a
time.
Host mode – Connects a Bluetooth headset to place and answer calls with a
Bluetooth headset.
Device mode – Connects your smartphone to manage calls and use your phone as
a Bluetooth speaker.
When you pair your Bluetooth headset to the phone, you can use your headset to
manage call audio. When you pair the phone to your PC, tablet, or mobile phone,
you can use the phone to answer a call, end a call, or reject a call.
Using Bluetooth Headsets
If your system administrator has enabled Bluetooth capability for your phone, you
can use a Bluetooth headset to handle calls.
88
Chapter 13 Connecting Bluetooth and USB Devices
To Next Page
Loading...
