3. Select the intensity you want, then select Back.
4. On the Backlight Intensity screen, select Backlight Idle Intensity.
5. Select the intensity you want, then select Back.
6. On the Backlight Intensity screen, select Maximum Intensity.
7. Select Up or Down to increase or decrease the maximum intensity.
Set the Backlight Timeout
Set the Backlight Timeout to determine how long the phone is idle before the
backlight dims. By default, the backlight dims after the phone is idle for 40
seconds. The backlight automatically turns on with any phone activity.
Make sure to configure the Backlight Idle settings.
1. Go to Menu > Settings > Basic.
2. Select Backlight Timeout.
3. Choose the number of seconds the phone is idle before the backlight dims.
4. Press the Check softkey to confirm the selection.
Changing Your Background
You can change the background picture on your phone to any image set up by your
system administrator or your own photo.
By default, your screen displays a blue background named Default. If no
background images are set up, only the Default is available.
You can also add personal photos on your phone using the Web Configuration
Utility or a USB flash drive.
Change the Background Picture
If your system administrator has pre-loaded your phone with background pictures
or you have added personal photos onto the phone, you can choose to display a
background other than the default.
1. Go to Menu > Settings > Basic > Preferences.
2. Select Background and select a background image.
Depending how your system is set up, you might have to select Background >
Select Background. The Select Background screen is displayed.
Adding Personal Photos as Your Background
Upload a personal photo to replace the default background using the system web
interface or using a USB flash drive.
When you set one of your photos as the background picture, the picture is
displayed as Local File in the Backgrounds list.
Set the Backlight Timeout
73
To Next Page
Loading...
