Stop Video for All Calls
Stop your phone from automatically transmitting your video at the start of all calls
by disabling the Auto Start Video Tx setting. The default setting is enabled, which
automatically transmits video at the start of every call.
NOTE: Stopping video doesn't create an audio-only call. Even if you stop video,
video information is still transmitted to the far side as a still picture, and the call is
still a video call.
1. Do one of the following:
● From the menu, select Stop My Video.
● Go to Settings > Basic > Video > Video Call Settings and disable Auto
Start Video Tx.
2. Select Auto Start Video Tx > Disabled.
When disabled, your phone does not automatically transmit video at the start
of all calls and the No Video icon is displayed next to your video during
video calls.
Improve Video Clarity
You can change the target frame rate to improve video clarity.
The target frame rate determines how smoothly your video displays. You can set a
rate between 5 and 30 frames per second. 30 frames per second is the smoothest
frame rate. The default rate is 30.
1. Go to Settings > Basic > Video.
2. Select Camera Settings > Target Frame Rate.
3. Choose Up or Down to adjust the frame rate.
Adjust Video Quality
You can adjust the camera settings on your Poly CCX system to improve video
quality.
1. Do one of the following:
● Select Camera .
● Select Menu > Camera.
2. Select Settings > Camera Preferences.
3. Adjust or toggle the following camera settings:
● Brightness
● White balance
● Saturation
42
Chapter 6 Video Calls
To Next Page
Loading...
