● Off Hours Idle Timeout: The number of minutes (1 to 10) the phone waits
during nonoffice hours before starting power saving mode.
● User Input Idle Timeout: The number of minutes (1 to 10) the phone waits
after you press a key or tap the screen before starting power saving
mode.
3. Select Save.
Changing Audio Settings
You control certain audio settings on your phone, including the ringtone for
incoming calls from all contacts or a specific contact, where call notifications
play, and the volume of the ringtone or call audio.
Change Incoming Call Notifications
You can choose whether you hear sound effects—all phone sounds except call
audio—from the handset, headset, speaker, or the active audio device you set.
You can configure your phone to ring on your headset instead of the speaker. By
default, you hear all sound effects from the speaker.
1. Go to Menu > Settings > Basic > Preferences.
2. Select Audible Ringer and select a location to hear sound effects.
Set a Ringtone for Incoming Calls
Select unique ringtones for incoming calls on different lines on the phone. The
default ringtone is Low Trill.
1. Go to Menu > Settings > Basic > Preferences.
2. Select Ring Type.
3. On the
Ring Type
screen, select a ringtone.
4. Optional: Press the Play softkey to hear the ringtone.
Set a Ringtone for Individual Contacts
Select unique ringtones for contacts in your directory to help you quickly identify
callers.
1. Go to Directories > Contact Directory.
2. In the Contact Directory, select a contact.
3. On the
Edit Contact
screen, select Ring Type and choose a ringtone.
4. Select Play to hear the ringtone.
5. Press the Check softkey to confirm the selection.
6. Select Save.
Changing Audio Settings
79
To Next Page
Loading...
