Poly CCX - Create a Personal Ring Group; Add Numbers to Your Simultaneous Ring List; Delete Numbers from the Simultaneous Ring List

When the incoming call is answered on one of the phones added to your
Simultaneous Ring list, the call is logged in the Missed Calls list on the other
phones. Unanswered incoming calls are logged in the Missed Calls lists on all
connected phones.
Check with your system administrator to find out if this feature is available on your
phone.
Create a Personal Ring Group
Before you can add numbers to your personal ring group, you need to enable the
Simultaneous Ring feature on your phone.
1. Do one of the following:
● Select UC-One on the Home screen.
● Go to Settings > Features > UC-One Call Settings.
2. Select a line.
3. Select Simultaneous Ring Personal.
4. Select Status > Enabled.
Add Numbers to Your Simultaneous Ring List
You can add up to 10 extensions and phone numbers to the Simultaneous Ring list.
When you add an extension or a phone number, you can choose to enable Answer
Confirmation Required, which notifies you when a call is answered on one of the
added numbers.
1. Do one of the following:
● Select UC-One on the Home screen.
● Go to Settings > Features > UC-One Call Settings.
2. Select a line.
3. Select Simultaneous Ring Personal > Add.
4. Enter an extension or phone number.
5. Select Answer Confirmation Required to receive confirmation that the call
was answered.
6. Select Save.
You cannot pick up or barge in on calls answered on another phone. The
contact who answers the call must transfer the call to your phone or park the
call on your line for you to speak with the caller.
Delete Numbers from the Simultaneous Ring List
You can delete a number added to your Simultaneous Ring list at any time.
102
Chapter 15 Cisco BroadWorks Features