2. Choose one of the following:
● Default
● Line View
● Meeting
Line key distribution scenarios
When you use the Generic base profile, line key allocation occurs in one of three
modes, depending on your preferred
Home
screen selection.
Default view
● The
Lines
page is removed completely and is no longer available by swiping.
● Swiping the line keys at the bottom of the page is disabled.
● On CCX 505 phones, line keys at the bottom of the screen show indexes 1 to 3,
and indexing on the expansion module starts at index 4.
● On CCX 600 and CCX 700 phones, line keys at the bottom of the screen show
indexes 1 to 5, and indexing on the expansion module starts at index 6.
Line view
● Line key page 1 remains on the host phone, and line keys from the CCX phone’s
virtual line key pages 2 to 4 move to the expansion module.
● On CCX 505 phones, lines keys at the bottom of the screen show indexes 1 to 7,
and indexing on the expansion module starts at index 8.
● On CCX 600 and CCX 700 phones, line keys at the bottom of the screen show
indexes 1 to 15, and indexing on the expansion module starts at index 16.
● You can swipe from Line view to Default view.
Meeting view
● The
Lines
page is removed completely and is no longer available by swiping.
● Line key index 1 starts on the expansion module.
● You can swipe from Meeting view to Default view.
118
Chapter 17 Poly CCX EM60 expansion module
To Next Page
Loading...
