■
Press New Call and dial *88 and the extension the call was parked on.
For example, dial
*884144
.
Ignore a Parked Call
You can choose to ignore a parked call instead of retrieving the call.
Ignoring the parked call removes the parked call icon, but the call remains parked
on your line until the call is retrieved, the retrieval time expires, or the call is ended.
1. Press and hold the line key with the parked call.
The Park Info soft key is displayed.
2. Press the Park Info soft key.
The Parked Call screen is displayed.
3. Press Ignore.
The phone exits the Parked Call screen, and the Call Park icon and status
message is removed from the line.
Managing Calls Remotely with Cisco BroadWorks Server
Manage calls to your line remotely using the BroadWorks Anywhere or Remote
Office features.
When you register your phone with a BroadWorks server and sign in to UC-One,
you can manage calls to your line remotely.
You can handle any incoming calls to your office phone on other phones or mobile
devices. Move calls from your mobile device to your desk phone without ending
the call.
Check with your system administrator to find out if these features are available on
your phone.
Managing Calls with UC-One BroadWorks Anywhere
BroadWorks Anywhere is a UC-One feature that enables you to use one phone
number to receive calls on your desk phone, mobile phone, or home office phone
and place calls from any of these phones using one number.
BroadWorks Anywhere also enables you to move calls between your desk phone
and mobile phone as well as perform any additional functions, such as intercom
calls that you would make from your desk phone.
Contact your system administrator or service provider for more information on
using BroadWorks Anywhere.
Enable BroadWorks Anywhere
Enable BroadWorks Anywhere (BWA) to add locations that act as duplicates of
your desk phone. Once you enable and configure BWA, you can manage calls from
any of your added locations.
Ignore a Parked Call
31
To Next Page
Loading...
