Poly CCX - Adjust the Video Display; Adjust the Camera Position During a Call

● Sharpness
● Backlight compensation
Adjust the Video Display
You can adjust video settings to control the appearance of video you receive from
the far end.
Depending on how the far end video's aspect ratio differs from your display's
aspect ratio, you can adjust how the video image displays on your screen.
1. Go to Settings > Basic > Video.
2. Select Video Screen Mode and choose one of the following video screen
settings:
● Normal: The video image retains the aspect ratio sent from the far
end. Black bars appear wherever the aspect ratio of the received video
doesn’t match your screen.
● Full: The system fits the video to the screen. Stretched portions of the
video may appear distorted.
● Crop: The system enlarges and crops the video to fit your screen without
stretching the video.
● Video Screen Mode (Window): Adjusts the video image that displays in
the Active Call screen. The default setting is Normal.
● Video Screen Mode (Full Screen): Adjusts the video image that displays
on the full screen. The default setting is Normal.
3. Select Save.
Adjust the Camera Position During a Call
You can control the position of a Poly camera during or before a video call.
1. Do one of the following:
● Select Camera .
● Select Menu > Camera.
2. Do one of the following:
● Select Near to adjust your camera.
● Select Far to adjust a call participant’s camera.
3. Adjust the camera position using one of the following options:
● Use the onscreen arrows.
● Drag your finger across the onscreen video stream.
Adjust the Video Display
43