End PTT Broadcasts
If you end an active PTT broadcast, it only ends the PTT for your phone. Phones
that are still on the same PTT broadcast can still communicate with other phones
using PTT.
■
Do one of the following:
● Release Talk.
The broadcast enters a waiting period. You can initiate another broadcast
on another channel when the waiting period ends.
● Select End PTT.
The broadcast ends. You cannot resume the broadcast by pressing and
holding Talk on the same channel. You can immediately initiate another
broadcast on another channel.
Push-To-Talk Settings
Update your PTT settings to change your default channel, update channel
subscriptions, and enable broadcasts to play during active calls.
NOTE: The features described in this section require access to the Basic
settings menu on the phone. If your phone requires a password to access the
Basic settings menu, contact your system administrator for assistance
customizing your phone.
Change the Default Channel
Update the default channel the phone uses to transmit PTT messages.
The default channel is channel 1. When you change the default channel, the phone
automatically subscribes to the channel you select.
1. Go to Settings > Basic > Preferences > Paging/PTT Configuration.
2. Select PTT Push to Talk > Default Channel.
3. Select the new default channel number.
Update Channel Subscriptions
Subscribe to any channel that appears in your channels list. Your system
administrator must enable the channel for it to appear in your list.
When you subscribe to a channel, you can send and receive PTT broadcasts on
that channel.
1. Go to Settings > Basic > Preferences > Paging/PTT Configuration.
2. Select PTT Push to Talk > Channel Subscriptions.
3. In the Channel Subscriptions screen, select the channel you want to
subscribe to.
4. Select Yes.
End PTT Broadcasts
69
To Next Page
Loading...
