You can’t send a page while you are in an active call.
1. In the
Lines
screen, select the Paging softkey.
2. In the
Paging Groups
screen, select a paging group.
NOTE: When you send a group page without selecting a page group, the
phone automatically sends it to the default paging group (group 1).
3. Select Page.
Just before the page starts, you hear an alert tone, then the page begins.
4. To end the page, select End Page.
Send a Group Page with the Poly Control Panel
Broadcast a page to a configured group paging channel using the Poly Control
Panel.
1. From the top of the system display, swipe down to display the Poly Control
Panel.
2. Optional: Swipe down a second time to expand the panel and display the icon
names.
3. Select the Group Page icon.
Depending how your administrator configured this feature, you may need to
select a group paging channel.
■
Optional: Select the channel you want to page from the
Group Page List
.
4. Make the page to the group.
The phone immediately broadcasts it to the paging group.
Receiving Pages
How you receive a page depends on the priority of the page, whether you are in an
active call, and whether your phone is set to receive a page during an active call.
You receive pages on the paging groups you are subscribed to as well as group
24 (priority pages), and group 25 (emergency pages). When you enable Do Not
Disturb, you only receive emergency pages. Nonemergency pages don’t display or
play on your phone.
When you receive a page, the page always plays through the phone's
speakerphone. You can’t play a page through your handset or headset.
Listen to a Page During an Active Call
Pages received during an active call defer or automatically play, depending on the
page priority.
64
Chapter 10 Accessing, Sending, and Broadcasting Messages
To Next Page
Loading...
