NOTE: You can’t create new groups, delete existing groups, or move contacts
from one group to another on your phone. You can only alter groups in the UC-
One client on your computer.
■
Select Directories > UC-One Contacts.
Your UC-One groups display. If there are no user-defined groups, contacts
display under the All Contacts group.
View Aggregated Self-Presence for Cisco BroadWorks Lines
The home screen displays the aggregated self-presence received from the Cisco
BroadWorks Messaging Server (UMS).
■
From the
Home
screen, press
Filter UC-One Favorites
You can filter your list of contacts either by Favorites or by your contact's status.
1. Select Directories > UC-One Contacts.
2. Select Filter .
A filter selection screen is displayed.
3. Choose your desired filter selection:
● Select Favorites to display only your UC-One Favorites on the Home
screen and in the UC-One Contacts list.
● Select Online to display only the UC-One contacts that are currently
online on the Home screen and in the UC-One Contacts list.
Search for UC-One Contacts
You can search for UC-One contacts from the UC-One Contacts screen.
NOTE: For more information on using Cisco BroadWorks applications, refer to
the BroadWorks documentation.
1. Select Directories > UC-One Contacts.
2. Select Search .
3. Enter your contact's first or last name.
A list of search results display.
UC-One Simultaneous Ring
When your phone is registered with a Cisco BroadWorks server and you're signed
into the phone with your UC-One credentials, you can use the Simultaneous Ring
feature to up to 10 extensions and phone numbers that will ring simultaneously
when you receive an incoming call.
View Aggregated Self-Presence for Cisco BroadWorks Lines
101
To Next Page
Loading...
