to display or have all photos display in slide-show style. This is an alternative to
setting up a screen saver, and it automatically starts each time your phone is idle a
certain amount of time.
1. Place one or more photos onto a USB flash drive, either in the root directory
or in a folder.
2. Attach the USB flash drive to your phone.
The USB icon is displayed on the status bar.
3. Go to Settings > Basic > Preferences.
4. Select Picture Frame > Folder, and enter the name of the folder you placed
your photos in on the USB flash drive.
If you placed the photos in the root directory of your USB flash drive instead
of a folder, do not enter a folder name.
5. Select Time Per Image, and enter the number of seconds you want each
photo to display.
You can enter a minimum of 3 seconds and a maximum of 300 seconds. The
default is 5 seconds.
6. Select Save.
If the message “No pictures found” displays after you select Save, there are
no photos in the folder you specified or in the root directory. Go back and
make sure the information you entered is correct.
7. Go to Menu > Settings > Basic > Preferences.
8. Select Screen Saver > Screen Saver screen and select Enabled.
9. Select Wait Time and enter the number of minutes the phone should wait
before displaying the screen saver after no activity.
Enter a time between 1 and 9999 minutes. The default is 15 minutes.
10. Select Save.
Your phone displays the screen saver after the number of minutes you
specified in the Wait Time field.
NOTE: If your phone doesn’t detect the USB device when you insert it into
the USB port, the USB port on your phone may be disabled. Contact your
system administrator for assistance using the USB port.
Disable the Screen Saver
Prevent the screen saver from starting, even if your phone has been idle for a
period of time.
You can stop a screen saver at any time by touching the screen. After your phone
is idle for the specified period of time, the screen saver starts again.
76
Chapter 11 Phone Settings
To Next Page
Loading...
