You can disable a screen saver by doing the following:
● Disable the Screen Saver setting. When you disable the setting, the screen
saver doesn’t display, even though the USB flash drive is still attached.
● Remove the USB flash drive. The screen saver doesn’t display until you attach
the USB flash drive again and your phone sits idle for the period of time you
specified.
1. Go to Menu > Settings > Basic > Preferences.
2. Select Screen Saver > Screen Saver then select Disabled.
3. Select Save.
Use Your Phone as a Digital Picture Frame
You can display your pictures as thumbnails, as a slide show, or a single picture.
1. Attach the USB flash drive that contains your photos to the phone.
NOTE: If your phone doesn't detect the USB flash drive when you attach it to
your phone, the USB port on your phone may be disabled. Contact your
system administrator.
2. Select Settings > Features > Removable Storage Media > Picture Frame.
Picture Frame Options
Use the icons in the following table to perform actions in the Picture Frame.
Table 11-1
Picture Frame Icons
Icon Label Action
Thumbnail View thumbnails of your pictures.
Back View the previous picture.
Forward View the next picture.
Pause Pause and display the current picture only.
Start Starts the display of pictures one-by-one
again.
Stop Stop displaying the pictures. The pictures
don’t display again until you access the
Picture Frame feature (unless you have a
screen saver enabled).
Background Image Set the picture that currently displays as the
background picture for your phone.
Power Saving Mode
Poly phones enter power saving mode to conserve energy after being idle for a
certain period of time.
Use Your Phone as a Digital Picture Frame
77
To Next Page
Loading...
