Reject Calls with Do Not Disturb on Multiple Lines
Use Do Not Disturb to reject incoming calls when you’re busy.
NOTE: By default, Do Not Disturb applies to all lines on your phone.
1. Select DND.
2. Select Set All to enable DND for all lines.
Reject Calls with Do Not Disturb on One Line
If enabled by your administrator, you can use DND to reject calls on one line.
1. Select DND.
2. From the Line Select screen, select a line.
3. From the Do Not Disturb screen, select Enable.
Disable Do Not Disturb
When you’re ready to receive calls, disable DND.
■
Select DND.
Reject Anonymous Calls
Use the Anonymous Call Reject (ACR) feature on phones registered and signed on
to BroadWorks servers.
Check with your system administrator to find out if this feature is available on your
phone.
1. Do one of the following:
● Select UC-One on the
Home
screen.
● Go to Settings > Features > UC-One Call Settings.
2. Optional: If your phone has multiple lines, select a phone line.
3. Select Anonymous Call Reject.
4. On the
Anonymous Call Reject
screen, select Enabled.
The phone automatically rejects anonymous calls, and the callers hear a
message stating you don’t accept calls from unidentified numbers. Your
phone doesn’t ring, and you aren’t notified of an attempted call.
Recording Audio Calls
On Poly CCX business media phones, you can record audio calls onto a USB flash
drive connected to your phone.
Recordings save as .wav files on the USB flash drive, and you can record up
to four hours in one .wav file. You can replay recordings on the phone or on a
computer.
36
Chapter 5 Audio Calls
To Next Page
Loading...
