EasyManua.ls Logo

Poly CCX - Using Electronic Hookswitch

Poly CCX
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Go to Menu > Bluetooth.
Go to Settings > Basic > Bluetooth Settings.
Select the Bluetooth icon .
2. Select Manage BT Devices.
3. Select your connected device from the Connected Devices screen and
select Disconnect or Forget.
Play Audio from a Bluetooth Device
Use your phone as a Bluetooth speaker for music or videos played on your mobile
phone or tablet.
1. Connect your mobile phone or tablet to the phone.
2. Set the phone as the audio device of your mobile phone or tablet.
3. On your mobile phone or tablet, choose the music or video you want to hear.
The audio plays through the phone's speakers.
Using Electronic Hookswitch
When you use a headset that supports electronic hookswitch (EHS), you can place,
answer, and end calls by using the controls on your headset.
NOTE: Some TTY devices can use EHS to interface with the phone. See your
TTY device documentation for more information.
For EHS, use a headset that includes a serial control interface in addition to the
standard analog headset jack (RJ-9) interface. The serial control interface requires
an EHS adapter that you can purchase from your headset manufacturer.
Headsets that support EHS include a base unit that connects to your phone.
The headset connects to the base unit wirelessly, which enables you to use your
headset even if you're some distance away from your phone. Typically, you can
work wirelessly up to 91 m (300 ft) from your phone and still use the EHS controls.
Check your headset's user guide for the precise range restrictions.
For a list of compatible headsets, see the Headset Compatibility Guide .
Setting the Headset Base Unit Options
Before you connect your headset to your phone and use EHS, you may need to set
certain settings.
Configure the following options for your specific headset model:
For Poly headsets, change the coarse receive level to 3 and the transmit level
to B on the headset base unit. For details, refer to the guide that comes with
your headset.
For Jabra headsets, change the headset mode to DHSG on the headset
base unit. For details, refer to your headset documentation or contact Jabra
support.
Play Audio from a Bluetooth Device
91

Table of Contents

Related product manuals