Pair and Connect a Smartphone to Your Phone
You can use your CCX phone to control smartphone calls and for audio playback.
You can pair up to two smartphones to your CCX phone. However, you can only
connect and use one smartphone at a time for call control and audio playback.
1. Do one of the following:
● Go to Settings > Basic > Bluetooth.
● Go to Menu > Bluetooth.
● Go to Settings > Basic > Bluetooth Settings.
● Select the Bluetooth icon .
2. Select Manage BT Devices.
3. Select Pair new device.
4. Select your smartphone from the list.
5. Verify that the Bluetooth pairing code matches on your phone and your
smartphone.
6. Select Pair on both your smartphone and your CCX phone.
Your phone and smartphone pair and connect.
Managing Calls with Your Smartphone
You can answer, reject, and end smartphone calls using your CCX phone.
NOTE: You can’t place smartphone calls from your CCX phone.
When you pair and connect your smartphone with your CCX phone, you can
perform the following tasks:
● Use the CCX phone to handle calls, including muting the microphone and
adjusting the call volume.
Control the volume of not only active calls but also any audio played on the
CCX phone.
● Answer an incoming call.
● Reject an incoming call.
● End an active call from your phone or a connected smartphone.
Disconnect or Unpair a Connected Bluetooth Device
Disconnect a Bluetooth device from the phone or unpair the device so it’s no
longer in the Bluetooth menu.
1. Do one of the following:
● Go to Settings > Basic > Bluetooth.
90
Chapter 13 Connecting Bluetooth and USB Devices
To Next Page
Loading...
