Polyend Play+ - Page 144

144
Polyend Play+ Manual Rev 2
NOTES
Sequencing Patterns
6
5. If MIDI tracks are required the audio pattern tracks can be copied over
like for like and MIDI channels assigned. Some elements such as
chance and repeat are removed when copying but can be entered in
the MIDI tracks directly.
• Copy Audio Tracks 1, 2, 3 and 4 Synths to MIDI Tracks 1-4
respectively. Set each of the four tracks to MIDI Channel 4. Select
audio tracks, press [Copy]. Select MIDI mode and its equivalent
tracks and Hold [Shift] + press [Paste].
• Copy Audio Track 5 Bass to MIDI Track 5. Set to MIDI Channel 5.
• To Set MIDI Channel, rstly select MIDI Mode, select the track then
use the (Sample) knob to adjust the Channel.
6. Save the project.
• Press (Screen) to select the menu. Turn (Screen) to navigate to
highlight ‘File’ in the menu. Press (Screen) to select.
• Turn (Screen) to highlight ‘Save Project As’. Be careful not to
overwrite the original base template by using ‘Save’. Press (Screen)
to select then press [Save] screen button.
7. The patterns are saved in the SD Card, Projects / MyProj / Patterns
folder. Use an external PC or Mac to copy the created pattern to the
‘BeatFill’ folder for use with ll. Do not change the project structure.