Polyend Play+ - Page 161

161
Polyend Play+ Manual Rev 2
NOTES
Arrangements & Variations
7
The value is set using the Randomize Type secondary parameter and the
range on the primary Randomize knob. The available secondary options
will be dependant on the Audio Sample or MIDI / Synth mode selected.
Primary Parameter
Secondary Parameter
Parameter Setting Description
Randomize 0% - 100%
Range for random value application. A
parameter value is applied within this range.
Parameter Setting Description
Randomize
Type
Sample In Folder
Will select a random sample from the currently
selected folder.
Randomize
Type
Sample In Pool
Will select a random sample from the entire
sample pool.
Randomize
Type
Sample Length Will adjust the length by randomising sample
start and sample end
Randomize
Type
Texture Patch of parameters consisting of Filter Cutoff,
Resonance and Overdrive.
Randomize
Type
1 Octave Plays notes within 1 Octave.
Randomize
Type
2 Octaves Plays notes within 2 Octaves.
Randomize
Type
Volume Adjusts Volume level.
Randomize
Type
Space Patch of parameters consisting of Panning,
Delay Send, Reverb Send
Randomize
Type
Nuke
Patch of parameters consisting of Samples in
Folder, Filter Cutoff, Resonance, Overdrive and
Panning.
Randomize
Type
Duke Nuke
Patch of parameters consisting of Samples in
Pool, Filter Cutoff, Resonance, Overdrive and
Panning.
Randomize
Type
Filter CC/Macro
Available only when MIDI/Synth mode and a
synth is selected. Will allow randomization to be
applied to the macro assigned to ‘Filter Cutoff’
The availability of options will depend on whether operating in Audio or MIDI/Synth
mode and the type of step selected.