162
Polyend Play+ Manual Rev 2
NOTES
Arrangements & Variations
7
▌ GENERATING RANDOMIZATION FOR STEPS OR A TRACK
1. When applying a Randomize, start by selecting steps;
• Select a track for a block of steps.
• Hold a [Pad] for a step on a track. Keep the pad held.
2. Touch (Randomize) to toggle the randomize or randomize type options.
Ensure the upper ‘Randomize’ option is in focus. The left side screen
buttons also can toggle between the options.
3. Turn (Randomize) or Turn (Screen) knob to set a percentage between
0% - 100%. A setting of 0% means no randomization and 100% will
cover the entire range of options from the Randomize Type values.
• The % represents the range of values from which to randomize, and
does not represent the number of steps affected.
• The value is applied globally, not individually per step.
• The value will be reset to 0% if the ‘Randomize’ display view is
exited, i.e. when selecting another sample based parameter.
4. Touch (Randomize) to toggle the randomize or randomize type options.
Ensure the lower ‘Randomize Type’ option is in focus. The left side
screen buttons also can toggle between the options.
5. Turn (Randomize) or Turn (Screen) knob to set a randomization type.
• This is the parameter / function that will be randomized.
• The range of values to choose from within the selected function will
be set previously by ‘Randomize’.
• The value is applied globally, not individually per step.
6. Ensure the ‘Randomize’ parameter screen is displayed in view. Playing
the pattern will generally apply the randomization while the randomize
screen is displayed. Exiting the display to select another sample based
parameter will also stop the application of randomization.
7. To print / x the randomization to a track, Press [Save]. The current
randomize setting will be now xed into the track.
8. To reset the printed randomization on a track, Hold [Shift] + [Reset] in
the randomize display. The current randomization is reset and ready for
a new randomization to be applied. This can then be saved if required.
To Next Page
Loading...
