Polyend Play+ - Page 32

32
Polyend Play+ Manual Rev 2
Projects & Tracks
3
NOTES
▌ SAVING A PROJECT
1. Press (Screen), the multi-functional screen encoder. The main menu
will be displayed. Turning (Screen) will navigate the menu.
2. Turn (Screen) to highlight ‘File’ in the menu.
3. Press (Screen) to select the highlighted ‘File’ option and to open the
submenu options.
4. Turn (Screen) to highlight ‘Save Project’ or ‘Save Project As’ in the
menu.
• Save is typically used to save an existing, named project after
editing or changing the project.
• Save As is typically used to save the project as an additional newly
named project. The naming menu is presented to apply a name.
This is usually performed for the rst save of a project even if ‘Save’
is selected.
5. Press (Screen) to select the highlighted ‘Save Project’ or ‘Save Project
As’ option and open the project browser window.
6. In the projects folder, Press [Save]. If ‘Save Project As’ function is
applied, the naming utility window will open to allow a new name to be
edited. If a name already exists in the location, a sufx will be added.
7. If naming option is presented, set a name or press [Auto Name]
dynamic button to automatically create a project name. Press [Conrm]
dynamic button to accept and save with the name edited.
8. The project is saved and will be indicated in orange text in the browser.
Play+ also automatically saves the currently active project every time a pattern is stopped by
pressing the dynamic screen button, [Stop].