Polyend Play+ - Page 75

75
Polyend Play+ Manual Rev 2
NOTES
▌ DELETING SAMPLES OR A FOLDER FROM THE SAMPLE POOL
1. Ensure the project in which to work is open and active.
2. Press (Screen) knob to open the options menu.
3. Turn (Screen) to navigate the menu options. The menu may display the
position level previously navigated. If required, Press [Back] screen
button to back up through the menu hierarchy.
4. Highlight the ‘Samples’ option and press (Screen) to select.
5. Highlight the ‘View Sample Pool’ option and press (Screen) to select.
This deletion process cannot be applied to SD Card les or folders.
6. The list of sample pack folders will be displayed, named in the Play+
convention style. Press (Screen) and [Back] to navigate within the folder
structures.
7. To delete a sample le.
• Highlight the le to delete. Hold [Shift] + Turn (Screen) to select
multiple les. Selected sample les are indicated in orange text.
• Hold [Shift] + Press [Delete]. The les will be immediately deleted
from the sample pool. They remain intact on the SD Card.
• Any folders that exist in the sample pool but are empty will not be
visible when using the (Sample) knob for sample selection.
8. To delete a folder.
• Highlight the folder to delete. Only individual folders in the sample
pool can be selected for deletion.
• Hold [Shift] + Press [Delete]. The folder will be immediately deleted
from the sample pool. They remain intact on the SD Card.
Note that the Undo / redo options is not available when in the sample pool le menu.
Deleted samples would have to be reloaded from the SD card to restore them to the
sample pool.
Samples & Synths
5