Preproofer 770 - Page 100

10
Printer Panel Configuration
Parameter Setup TOP and BOTTOM printer
10-36 Preproofer x700 / x900 – HW Installation Manual
PP x700/x900 v1.7
Stay in the “Paper NO.1” “, open the entry “Paper
Suction” and select “-3”.
Stay in the “Paper NO.1” “, open the entry “Set Roll
Paper Tension” and select “Extra High”.
Stay in the “Paper NO.1” “, open the entry “Remove
Skew” and select “OFF”.
Activate “Custom Paper NO.1” and select “Roll
Paper – No Cut”.