Preproofer 770 - Page 99

Printer Panel Configuration
Parameter Setup TOP and BOTTOM printer
10
Preproofer x700 / x900 – HW Installation Manual 10-35
PP x700/x900 v1.7
Select “Singleweight Matte”.
Stay in the “Paper NO.1” “, open the entry “Platen
GAP” and select “WIDER”.
Stay in the “Paper NO.1” “, open the entry “Paper
Feed Adjust” and select “+0.0%”.
Stay in the “Paper NO.1” “, open the entry “Drying
Time” and select “0.0sec”.
0,0 %