Mechanical Controls, All Models
29
Plugging In The Printer
In compliance with international safety standards, this printer is equipped with
a three-pronged electrical plug on the power cord. When this power cord is
plugged into a correctly wired power outlet, the ground conductor ensures that
the printer chassis is at ground (earth) electrical potential.
WARNING
Failure to properly ground the printer can result in electrical shock to
the operator.
Do NOT use adapter plugs or remove the grounding prong from the power
cable plug. If an extension cord is required, make sure it is a three-wire cable
with a properly grounded plug.
Printronix Customer Support Center
The Customer Support Center offers technical support with:
• Installation
• Configuration and setup
• Operation and supplies loading
• Specifications of the proper print media and ribbons
• Answers to post-sales service support questions
Call the Printronix Customer Support Center at (714) 368-2686 or visit the
Printronix web page at www.printronix.com.
Maintenance Training Available For Printronix Products
Printronix offers Product Maintenance Training Classes designed to enhance
the knowledge of your service personnel. Taught by a staff of highly
experienced professional instructors, these structured classes include:
• Theory of operation
• Hands-on work with the products
• Diagnosis of equipment failures
• Preventive and corrective maintenance requirements and procedures
Customized classes designed to meet your specific needs are also available
upon request. Call Customer Training at (714) 368-2332 or visit the Printronix
web page at www.printronix.com.
To Next Page
Loading...
