Printronix P5000 - Page 393

393
P5205A-12  500 lpm Cabinet 28 Hammers,
12 MIL tips
25 MHz CMX
P5205B
 500 lpm Cabinet 28 Hammers 40 MHz CMX
P5205B-12
 500 lpm Cabinet 49 Hammers,
12 MIL tips
40 MHz CMX
P5206H
 N/A Cabinet 102 Hammers 40 MHz CFX
P5208
 800 lpm Cabinet 49 Hammers 25 MHz CMX
P5209  900 lpm Cabinet 49 Hammers 25 MHz CMX
P5210
 1000 lpm Cabinet 60 Hammers 40 MHz CMX
P5212
 1200 lpm Cabinet 91 Hammers 25 MHz CMX
P5214  1400 lpm Cabinet 91 Hammers 40 MHz CMX
P5214-SS
 1400 lpm
Cabinet
w/SureStak
Paper Stacker
91 Hammers 40 MHz CMX
P5215
 1500 lpm Cabinet 102 Hammers 40 MHz CMX
P5215-SS
 1500 lpm
Cabinet
w/SureStak
Paper Stacker
102 Hammers 40 MHz CMX
1
The 40 MHz CMX controller board is also compatible with earlier models that used the 25
MHz CMX board and should be used if the CMX board is replaced in one of these older models.
The CFX, V1, controller board was used only in early models P5003H, P5203H, P5006H, and
P5206H.
Table 9. Early P5000 Single Hammer Bank Printers: Use Maintenance Manual 164253-001
Model
Max
Print
Speed
Enclosure
Single Hammer
Bank
Controller
Board
1