List Of Messages
55
ERROR OCCURRED
FLUSHING QUEUES *
An interim message that
displays while the printer
discards host data it cannot
use because a fault
condition exists. While this
message displays, the
asterisk (*) rotates.
Wait. When the asterisk (*) stops
rotating, a different fault message will
appear: troubleshoot the final
message.
ETHERNET ADAPTER
BEING INITIALIZED
Status message indicating
that the PrintNet® ethernet
interface is processing the
boot procedure. (May occur
with older versions of
microcode.)
No action required.
ETHERNET DETECTED
Status message indicating
that the PrintNet ethernet
interface has established
communication.
No action required.
Table 2. Message List
Message Explanation Solution
To Next Page
Loading...
