Promise Technology Pegasus3 R4 - Page 120

107
Managing the Pegasus3Pegasus3 Product Manual
4. In the Select Physical Drives diagram, click the drives to add them to your array.
The drive carriers turn blue when you click them. The physical drives’ ID numbers appear in the
eldbelowthediagram.
5. Whenyouhavenishedyoursettingsandchoices,clicktheSubmitbutton.
The new array appears in the list.
• If you are done creating disk arrays, click the Finish button.
• To create additional disk arrays, click the Create More button.
After you create a disk array, create a logical drive on it. See “Creating a Logical Drive Manually” on
page 130.