Making Global Physical Drive Settings
To make global physical drive settings:
1. Click the Device tab.
2. Click the Physical Drive icon.
3. Click the Global Physical Drive Settings button.
4. Check the boxes to enable, uncheck to disable.
For SATA drives:
• Enable Write Cache
• Enable Read Look Ahead Cache
• DMA Mode (use pull down menu to select option)
• Medium Error Threshold (Default is 64, range is 0-4294967294)
For SAS drives:
• Enable Write Cache
• Enable Read Look Ahead Cache
• Enable Read Cache
• Medium Error Threshold
5. Click the Save button.
107
Promise Technology
Management with WebPAM PROe