Promise Technology Vess R3600 Series User Manual

Making Management IP Settings
Use the Management Portal menu to view, change, enable or disable IP settings for the Subsystem and
Controller management. To change management IP settings:
1. Click the Device tab.
2. Click the Network Management tab, expand Portal and click on Management Portal.
IPv4 is enabled by default for Subsystem Management and Controller Management IP.
To enable IPv6, click to select the IPv6 conguration set for Subsystem Management IP or Controller
Management IP, and click on the Enable button.
• To disable a management portal conguration, click to
select it and click on the Disable button.
• To enable a management portal conguration, click to
select it and click on the Enable button.
3. To change IP setting for Subsystem Management or Controller Management IP, click to select the
conguration you want to change, and click on the Modify button.
• Check the Enable DHCP box to enable a DHCP server to make
your network settings. DHCP is currently supported in IPv4 only.
Note that you will have the option to enable Auto DNS.
• For manual network settings, type the RAID subsystem’s IP address,
subnet mask and gateway IP address into the elds provided.
4. Click the Save button.
115
Promise Technology Management with WebPAM PROe

Promise Technology Vess R3600 Series Specifications

General

Brand	Promise Technology
Model	Vess R3600 Series
Category	Storage
Language	English