Promise Technology Vess R3600 Series - Page 168

SNMP Service
Simple Network Management Protocol (SNMP) is the long used protocol for getting information or modifying
about managed devices on IP networks.
Stopping SNMP Service
To stop SNMP service:
1. Click the Administration tab.
2. Click the Service icon.
3. Click the gear icon for SNMP service and select the Stop option.
4. Type “CONFIRM” in the popup menu and click the Conrm button.
To start SNMP service after stopping it:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the gear icon for SNMP service and select the Start option.
4. Type “CONFIRM” in the popup menu and click the Conrm button.
Restarting SNMP Service
To restart SNMP service:
1. Click the Administration tab.
2. Click the Service icon.
3. Click the gear icon for SNMP service and select the Restart option.
4. Type “CONFIRM” in the popup menu and click the Conrm button.
148
Promise Technology Vess R3600 / Vess J3600 Product Manual