Promise Technology Vess R3600 Series - Page 245

Examples
initiator -i 1 -c 2
initiator -a add -n iqn.vendorcompany.com
-c <Count> Used to specify the number of initiators to be listed.
Only used with -a list option.
-t <type> When used with the -a add option, this option species which kind of initiator to add.
fc For a Fibre Channel host interface.
iscsi For an iSCSI host interface.
-n <Name> Used to specify the name of the initiator.
For an iSCSI host interface product, the name should be the initiator’s
iSCSI name, e.g. iqn.vendorcompany.com
For a Fibre Channel host interface product, the name should be the
initiator’s WWPN in hex format, e.g. aa-bb-cc-dd-ee-ff-11-22
225
Promise Technology Managing with CLI