Promise Technology Vess R3600 Series - Page 246

iscsi
Usage
iscsi [-a <action>] [-t <Type>] [-i <componentId>] [-r <CtrlId> -p <PortId>]
[-c <Count>] [-m <PortalInterfaceType>] [-v]
iscsi -a mod [-t <Type>] [-i <TargetId|SessionId|PortalId|DeviceId>]
[-r <CtrlId> -p <PortId>] -s “<list of settings>”
Summary
The iscsi command is used to display and modify iSCSI information and settings. Use this to view and modify
iSCSI component and global settings, and to add and delete iSCSI portals. iSCSI host interface product only.
Options
-a <action> Which action to perform.
list (Default) Gives summary information about iSCSI status.
add Add iSCSI portal.
mod Modify iSCSI settings.
del Delete iSCSI target, portal or session.
-t <type> Species the type of information. For list action, the default
is target if unspecied. For modify action, the default is global
iSCSI setting if the type is unspecied.
target Species iSCSI target as the device type to display, add, modify or
delete information.
port Species iSCSI port as the device type to display or modify
information.
session Display or delete session information.
portal Display, add, modify or delete portal information.
device Displays the logged in devices information.
226
Promise Technology Vess R3600 / Vess J3600 Product Manual