Examples
logout
lunmap
Usage
lunmap [-a <action>] [-i <InitiatorId>] [-t <type>] [-c <Count>]
lunmap -a addlun -i <InitiatorId> [-p <SourceType>] [-l <SourceIdList>] [-m <LunMapList>]
lunmap -a dellun -i <InitiatorId> [-p <SourceType>] [-l <SourceIdList>]
lunmap -a add [-i <InitiatorId>] -n <Name> -t <type> [-p <SourceType>] [-l <LdIdList>] [-m <LunMap>]
lunmap -a del -i <InitiatorId>
lunmap -a enable
lunmap -a disable
Summary
The lunmap command displays information about the current LUN mapping and masking (LMM) table information
and enables you to add, modify, and delete LMM entries. LMM can be enabled or disabled.
logout
Usage
logout
Summary
The logout command is used to logout the current user from the session.
233
Promise Technology
Managing with CLI
To Next Page
Loading...
