Promise Technology Vess R3600 Series - Page 278

The following settings are only for SATA drives:
dmamode= For SATA drive only. Attempt to negotiate at the specied DMA transfer
mode.
If a DMA transfer mode cannot be negotiate, the next slower mode will
be attempted until a mode can be negotiated
(udma6, udma5....udma0, mdma 2.....mdma0).
udma0 Ultra DMA Mode 0
udma1 Ultra DMA Mode 1
udma2 Ultra DMA Mode 2
udma3 Ultra DMA Mode 3
udma4 Ultra DMA Mode 4
udma5 Ultra DMA Mode 5
udma6 Ultra DMA Mode 6
mdma0 Multi DMA Mode 0
mdma1 Multi DMA Mode 1
mdma2 Multi DMA Mode 2
The following settings are only for SAS drives:
readcache= Applied to SAS drive only. Enables or disables read cache on the physical
drive(s).
enable
disable
-v Verbose mode. Used with -a list.
258
Promise Technology Vess R3600 / Vess J3600 Product Manual