Pulseroller ConveyLinx-Ai2 User Manual

Run After Distance
EasyRoll provides the option to change the Run After metric to be distance based instead of time based.
When the metric is distance, the value entered is millimetres instead of seconds
Select Distance from the drop-down box
and enter new values for upstream and/or
downstream Run After distance and click
the corresponding Set button. The default
is 1000 mm and the valid range is 0 to
65,535. The Set All button will apply these
same settings for the range of modules
indicated at the top of the dialog. In this
example we changed the Run After
distance to 100 mm and using the Set All
button to update this setting in Nodes 3
thru 4.
Last modified: Aug 18, 2020
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 108 of 154

Pulseroller ConveyLinx-Ai2 Specifications

General

Brand	Pulseroller
Model	ConveyLinx-Ai2
Category	Control Unit
Language	English