7.1.4.4. Rotation Direction
This setting is either Clock-Wise (CW) or Counter-Clock Wise (CCW)and is determined for each module
based upon the Auto-Configuration Procedure results. Please refer to section Motor Rotation Definition for
details on how to determine rotation direction with respect to MDR installed orientation.
Selecting a direction from the drop-down
box immediately sets the rotation direction.
You can also use the Set All button to set
the selected rotation direction to each
motor in the From Node # / To Node #
boxes. In this example the Left MDRs from
nodes 1 thru 6 will each get the same CW/
CCW rotation direction setting
Last modified: Aug 18, 2020
Please note that if you change the Rotation Direction and this module goes through
another Auto Configuration procedure, the Rotation Direction setting will not reset back
to default. It will remain unchanged at the last selected setting.
*
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 94 of 154
To Next Page
Loading...
Need help?
General